View All Ball Buttons
Ball Buttons are press-in detent inserts used with ball plungers. Push into a reamed hole to create a wear-resistant mating detent that helps prevent part damage and provides a hardened striker surface for side loads. Each ball button is 440C stainless steel, hardened and ground with a chamfered end for easy insertion. Available for ball plunger sizes 1/8 through 5/8. Product not available in metric.
Specify by:
- Ball plunger compatibility (series or size)
- Reamed hole size and ball button dimensions (A and B per table)
Click any row to see CAD and additional product information, or to add to quote.
| Part No. | For Ball Plungers | A | B +.0002 -.000 | C | ROHS | CAD |
| BB46 | SSB46, SSB47, DSSB46, DSSB437, B46, B47 | 1/8 | 0.1075 | 0.056 | BB46 | |
| BB48 | SSB48, DSSB48, B48 | 1/8 | 0.1175 | 0.061 | BB48 | |
| BB50 | B52, BM4, BM6, BL52, BH52, BML6, MBH6, SSB50, SSB52, SSBL52, SSBH52, DSSB50, 50A, 52 | 3/16 | 0.1614 | 0.069 | BB50 | |
| BB54 | SSB54, SSBL54,SSBH54, D54N, D54, DSSB Series | 1/4 | 0.2034 | 0.111 | BB54 | |
| BB56 | B56, BM8, BMH8, BML8, BL56, BH56, SSB56, SSBH56, D56, DL56, ND56, NDL56, DSSB Series | 5/16 | 0.2659 | 0.139 | BB56 | |
| BB58 | BM10, BML10, BMH10, B58, BL58, BH58, SSB58, SSBL58, SSBH58, D58, DL58, ND58, NDL58, DSSB Series | 3/8 | 0.3284 | 0.164 | BB58 | |
| BB60 | B60, BL60, BH60, BM12, BMH12, BML12, SSB60, SSBL60, SSBH60, DSSB Series | 1/2 | 0.4378 | 0.241 | BB60 | |
| BB62 | B62, BL62, BH62, SSBH62, SSBL62, SSB62 | 5/8 | 0.5472 | 0.330 | BB62 |
Conversion Calculators
Enter known value in place of X to view results.
Metric & Inch conversion:
Inch
=
mm
Lbf/Newton Conversion:
lbf
=
N
Translate